|
|
News and Events |
| Joral Introduces Line of Rugged Duty Shafted Encoders |
Overview
Output Options
Housings
Full Family Spec (6Meg)
|
Joral has developed a line of rugged-duty shafted rotary encoders designed to meet the demanding
needs of the controls, power equipment, hydraulics and off-road vehicle markets.
Joral rugged-duty encoders are perfect for use in harsh applications where dirt, moisture, vibration
and shock are factors.
A wide range of sizes, output features and connector choices are available for both incremental and absolute position sensing.
Check out the
Joral Advantage of features and functions available in our new line of encoders.
- Super Durability
- Fully Sealed Electronics
- Captive Shaft Design
- Incremental and Absolute Position
- Diagnostic LED Indicators
- Bullet-Proof Electronics
|
|
|
| J1939 Boom Angle Sensor Now Available |
|
Joral has released their new 1939 Boom Angle Sensor
for use on J1939 Can Bus systems.
The rugged-duty sensor consists of two small and lightweight 3-axis angular sensors.
One sensors mounts to the cab or base and the other mounts to the boom.
The two parts of the sensor communicate allowing the
device to compute relative and absolute angles. Data
is transmitted on the industry standard J1939 Can
Bus to provide a system with information for making control and loading decisions.
The Joral Boom Angle Sensor can be applied to a variety of applications where the angular position of two moving parts is important.
Boom Angle Sensor Data Sheet
J1939 Can Bus communications Fully potted and sealed. IP67 rated Rugged-duty. Solid-State. No moving parts! Computes Absolute and/or Relative Boom Angle Light
weight packaging (less than 6 oz)
Call Joral to discuss your special application. (262)-522-3266
|
|
|
Joral Introduces New Products at
2009 Sensor Expo
CHICAGO, IL -- The Joral booth drew crowds at the 2009 Sensor Expo at Rosemont Exposition Center.
The new 18mm and 30mm Prox Encoders were introduced adding to the
already exciting lineup of Hockey Puck encoders.
Customers are finding it easy to use the Prox
Encoders because of the standard packaging.
Engineers and designers are excited about available
customizations for integrating the sensors into
their products.
Call Joral today for more information or to discuss your application.
|
|
|
Joral Delivers for Drive-Shaft Applications
Joral is addressing the need in the drive-shaft sensing market with the combination
of a split-collar magnet assembly and the 18mm encoder. This combination provide an easy
mounting method and high pulse count for quality speed and direction sensing. Collars can be provided
in various diameters or materials depending on your needs.
Call Joral today for more information or to discuss your application.
18mm
Data Sheet
|
|
|
The Prox Encoder™ 18mm and 30mm
"NON-CONTACT!" |
Joral is pushing non-contact encoders to a new and
smaller level. Our innovative Hockey Puck non-contact
technology has been applied to standard sensor packages of 18
and 30mm diameters. These encoders mount like a
prox sensor, but are actually high resolution encoders.
They come complete with LED indicators
showing power and encoder status signals.
These encoders are magnetically based sensors that do not require a mechanical connection
or shaft coupling. No more shaft problems. No more worn bearings.
Our Hockey Puck sensing technology tolerates misalignment and distance variations.
Senses Rotation
non-contact -
Threaded Barrel
Up to 3000 RPM.
Up to 8192 positions per revolution -
Easy Installation
-
LED Indicators
Absolute Position or
Incremental Outputs
Rugged-Duty Construction
Tolerates Misalignment
30mm
Data Sheet
18mm
Data Sheet
Short Non-Contact Power-Point
|
Non-contact encoders in
standard sensor packaging.
 |
|
Magnet
Assemblies make Installations a Breeze |
|
Joral is supplying several types of magnet assemblies for use
with the non-contact 'Hockey Puck' and 'Prox Encoder' lines.
High quality magnets are packaged in forms that assist in
installation and ensure a good magnetic sensing field for the
encoder. Two types are shown. The Bolt style
provides a magnet pressed into the head end of a bolt so the
bolt can be threaded, pushed or mated with the end of a rotating
shaft. The Sleeve or Collar style can be slide over a
shaft and contains two separate magnets to provide a very strong
field and provide a high degree of separation to the encoder.
Contact Joral for your special needs.
|
|
The Bolt Style Magnet
 |
|
The Sleeve or Collar Style Magnet
 |
|
The New Explosion Proof Encoder, with NO Shaft or Bearings! |
Joral is introducing an explosion proof rotary encoder
for the oil and gas industry. Named the XPHP, it is a
non-contact sensor that does not require a mechanical connection
or shaft coupling. No more shaft seal
problems. No more worn bearings. The device magnetically senses rotational
motion up to 3000 RPM right through the explosion proof housing!
Patent Pending.
Senses Rotation right
through the Housing Up to 3000 RPM.
Up to 8192 positions per revolution Absolute Position or
Incremental Outputs
Easy Installation
Extremely Rugged-Duty Construction
Tolerates Misalignment
Check out the Press Release.
Download the Data Sheet.
|
Non-contact explosion
proof encoder in a 3.5" housing.
 |
|
18mm and 30mm Brackets readily available |
Joral can supply easy to install brackets for your
encoder. Models are available in right angle
mounting or with a flat face for both the 18mm and
the 30mm models.
Contact Joral for your special needs or if you need helping finding hardware.
Mounting Bracket Data Sheet
|
|
Angle
Brackets
 |
|
Flat Bracket
 |
|
Joral Introduces Non-Contact Encoder. |
Joral has developed a patent pending revolutionary new encoder
called the Hockey Puck. It is non-contact to the measuring surface
and compensates for mechanical misalignment.
It has no shaft or bearings so the problems of drag, endplay, corrosion,
side loading, and push-out have been eliminated.
The user mounts a magnet on the rotating object and locates the encoder close by.
Precise mounting is not required, as it will tolerate changes in distance,
centering and planer tilt. This is important as the machine wears over time.
Non-contact means vibration and shock from the mechanics are not transmitted
directly to the electronics in the encoder.
This new device will surely change the use of encoders in rough applications.
Designer Kits available... Order One Today!
Download the
Data
Sheet for the 58mm Hockey Puck product.
|
The Hockey Puck has a wide sensing envelope
 |
|
|
|
|
