Rugged Encoders, Sensors
And Controllers


Home      Contact

Products for Logging and Timber

       

Logging and Timber Encoders
Joral has developed a line of very heavy duty replacement encoders for the logging industry. These encoders have been designed to fit the various harvesting heads.

Joral Encoders are Superior!
  - One moving Part - the Shaft!
  - The encoder electronics are entirely sealed!
  - Machined from a single piece of 6160 aircraft grade aluminum!
  - Installation and Diagnostic LEDs make our encoder easy to use!
  - Easy-Wire connector makes wiring a snap!
  - The perfect combination of ruggedness and sophistication!

Head Mfgr Encoder Description Joral P/N Photo
Log Max
Spec		 - 58 mm shell, 6 mm shaft
- 3 screw hole or servo groove mount
- 6 to 30 VDC, 80 pulses per rev		 J1-Logmax-58-80-6
(Log Max: 401-104)
Fabtek
Spec		 - Round or Square Shell
- 256 or 200 pulses per rev
- slotted or round shaft		 J1-FT-256-RS (for meas.)
J1-FT-256-SS (for diam.)
J1-FT-256-RR (for diam.)
Timberjack
Spec		 - 30mm or 68mm Shell
- 100 or 125 pulses per rev
- 6mm shaft		 J1-Timberjack-30-100
J1-Timberjack-30-125
J1-Timberjack-68-100
J1-Timberjack-68-125
Valmet
Spec		 - 58 mm shell, 6 mm shaft
- 3 screw hole or servo groove mount
- 6 to 30 VDC, 80 pulses per rev		 J1-Valmet-58-80-6
Quadco
Spec		 - 58 mm shell, 10 mm shaft w/flat
- 4 pin circ. connector
- 6 to 30 VDC, 100 pulses per rev		 J1-QA1-100-10
Lako
Spec		 - 58 mm shell, 6 mm shaft
- servo groove mount
- 80 pulses per rev, 4 pin circ. conn		 J1-Lako-58-80-6
G&R
Spec		 - 2"shell, 0.375" shaft
- upright or angle conn.
- 6 to 30VDC, 200 or 256 pulses		 J1-GR-2-200-375
J1-GR-2-256-375
AFM
Spec		 - 58 mm shell
- 10 mm shaft w/flat
- 125 pulses per rev		 J1-AFM-58-125-10
Denharco
Spec		 - 30 mm shell
- 125 pulses per rev		 J1-Denharco-30-125
Waratah
More Info...		 - 50 mm shell
- Used for both Diameter and Length
- 500 pulses per rev		 J1-WAR-500
Replaces Part # WA106235
We have more encoders...
 Contact us if you do not see your mfgr.    

The Joral Cut-To-Length Computer!    
    Replace your old or broken Fabtek Series 2000 computer

The CLC-T3-2000 is designed to replace the aged Fabtek Series 2000 cut length computer. The cables and connector are completely compatible with the 2000 system.  The CLC-T3-2000 offers 9 presets and integrates the keypad and display into a single housing. Our system will work with prox sensors or encoders.

To replace your old system, remove the Series 2000, mount the Joral computer, connected the cables, and program your setpoints.  Package includes the computer, RAM mounting arm, cables and operations manual.

The Joral CLC-T3-2000 easily replaces the aged Fabtek Series 2000 Cut Length Computer

Joral  LLC    |  5050 S. Towne Dr.   |   New Berlin, Wi 53151   |   262-522-3266